Online store of agricultural machinery
> Machinery

Machinery

Grain seed drills

Grain seed drills (variable)

Seed drills for row crops

Cultivators for continuous cultivation

Cultivators for row crops

Seed drills No-till

High-speed wide-mesh plows

Grain seed drills "Demetra Mini"

Tooth harrow couplers (Hydraulic)

Tilled seed drills "Demetra Mini"

Mineral fertilizer spreaders

Tractors YTO

View all categories

Sort by:

Tile

List

Eccentric plow 5 body Demetra ppn-5

Plow Demetra 5-body with feather moldboards These plows are used for all types of soil and are suitable for any tractors, including those produced by MTZ, with power ranging from 60 hp to 200 hp. The plows are characterized by high reliability and durability in operation. The helical shape of the moldboard ensures complete turning of the furrow slice and creates the best conditions for the decomposition of stubble residues. The bodies are equipped with moldboard extensions that improve the placement of the furrow slice. The special shape of the shares helps reduce resistance and provides a smooth plow run, maintaining depth effectively. Additionally, the chisel is made of high-strength steel, which extends its service life. Main features of the plow: Feather moldboard plow bodies adapted to any soil type Soil does not stick to the moldboard Requires up to 20% less traction Improves soil crumbling Stones do not get stuck between the plates

203 700 UAH

Hydraulic harrow hitch БПГ-8 BPG-8

Tooth harrow BPG-8 Designed for field soil cultivation. It is used for loosening the soil (exposing moisture) using the traditional tillage method, and is equipped with 8 heavy toothed harrows. The advantage of this harrow coupling is its working width during cultivation (8 m per pass), which significantly boosts labor productivity and resource savings, thereby reducing the overall cost of soil cultivation.

210 000 UAH

Precision seed drill СПМ-4 СПМ-4

Mounted Cultivator KPN-5.6 with a liquid mineral fertilizer application system designed for inter‐row cultivation of corn, sunflower, castor bean, and other row crops sown with row spacings of 600, 700, or 900 mm, featuring complete weed cutting, high‐quality soil loosening, and simultaneous application of liquid mineral fertilizers. The parallelogram suspension of the working organ sections ensures that the soil relief is replicated, while the atmospheric pressure tires and the rubber rollers of the cultivator provide self‐cleaning from caked dirt. An option for continuous cultivation using single‐sided flat‐cutting tines is provided. Advantages of our cultivator: High-quality polymer hopper, resistant to ultraviolet radiation and mechanical impacts Reinforced section with a 16 mm thick bar All section units are mounted on bearings Steel-cast holders for the working organs Atmospheric (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating on selected parts Technical specifications: Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 1 General Specifications 1.1 Cultivator Type mounted 1.2 Tractor power class, hp, not less than 65 80 100 2 Application Requirements 2.1 Productivity, ha/h 4.6 6 7.5 2.2 Working capture width, m 4.2 5.6 8.4 2.3 Cutting tines capture width, mm 270-330 2.4 Working depth, cm 5-16 2.5 Weed combing depth, cm, not more than 5-16 2.6 Weed cutting and combing, % 100 2.7 Transport speed, km/h, not more than 15 2.8 Working speed, km/h, not more than 10 3 Design Indicators 3.1 Total (design) weight, kg, not more than 750 950 1800 3.2 Overall dimensions in working state, mm: - length - width - height 4850 2100 1700 6500 2100 1700 9250 2100 1700 Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport state, mm: - length - width - height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, mm 300

212 000 UAH

Seed drill "DEMETRA MINI" СЗД 2400V - фото

Seed drill "DEMETRA MINI" СЗД 2400V SZD-2400V Mini

Mini Seeder SZD-2400V (mounted) A seeder for mini tractors built to European quality standards, designed for sowing cereals and small‐seeded crops with simultaneous application of dry mineral fertilizers. Equipped with: A continuously variable transmission (CVT) mechanism for ease and precision in setting the seeding rate A hopper rear wall made of stainless steel Polymer seed and fertilizer dispensing devices (additionally equipped with rollers for seeding forage crops) Openers made of hardened steel (Grade 30MnB5) Spring-loaded furrow closers (with the option to install conventional trailed wheels) When operated on small fields with non-standard dimensions, this seeder significantly reduces seeding time and energy consumption compared to trailed seeders. It can be mounted with tractors with power from 48 hp. Technical specifications of SZD mini SZD Model 2400 Working width (m) 2.4 Number of rows (pcs.)* 16/32 Distance between openers (mm)* 75/150 Seeding depth (cm) 0 – 11 Opener pressure (kg) up to 65 Seeding speed (km/h) 3 – 12 Transport speed (km/h) 20 Productivity (ha/hour) 0.63 – 2.7 Hopper capacity (m³/kg)** 0.265 (225) - with seed 0.2 (167) - with fertilizers 0.065 (58) Full load covers (ha) 0.67 Empty seeder weight (kg) 680 Full seeder weight (kg)** 905 Dimensions: W x D x H (m) 3.16 x 1.63 x 1.415 Technology track (m) 3.0 Hitch category I Mini tractor power, not less than (kW/hp) 35/48 * Openers without or with offset / 2-row ** Maximum weight indicated! May vary depending on the density of the seeding material

212 000 UAH

Deep ripper ГРД-5 (3300) grd-5

The purpose of the subsoiler is to destroy the plow pan, preserve moisture, help regulate the air-water balance, and increase fertility. The HRD subsoiler helps to: create conditions for the accumulation of moisture from the air and its even distribution; increase porosity and improve the capillary system of the soil; activate biological processes that promote active root system development of crops and increase yields by 12-18%; remove excess rain and meltwater; reduce soil resistance when tractors operate with other equipment. This occurs by decreasing soil density, leading to fuel savings, reduced consumption of lubricants, and lower service loads; Technical characteristics of subsoilers No. z/p Name of parameter Values HRD-3 HRD-4 HRD-5 HRD-5 HRD-7 1 Productivity per 1 hour of main operation, ha/h 1.5 2.3 3.0 2.5 3.6 2 Number of working shanks, pcs. 3 4 5 5 7 3 Distance between shanks, cm 60/75 75 75 55 55 4 Tractor drawbar power, min, hp 80 120 150 150 200 5 Maximum working depth, cm 45 6 Working speed, not more than, km/h 7-10 7 Transport speed, km/h up to 15 8 Weight, kg 780 990 1210 1060 1400 9 Working width, m 1.5 (1.8) 2.3 (2.6) 3.0 (3.3) 2.5 (2.8) 3.5 (3.9) 10 Overall dimensions, m - length 1.5 2.3 3.0 2.5 3.6 - width 2.1 2.86 3.57 2.86 3.98 - height 1.34 1.34 1.34 1.34 1.34 11 Road clearance, min, mm 350 12 Warranty period of operation, min, months 12 13 Warranty service life, ha up to 500 14 Service life, min, years 8

218 000 UAH

Row cultivator КПН-5,6-05 КПН-5,6-05

Inter-row Cultivator Tillage KPN-5.6-05 It is used for inter-row cultivation — sunflower, corn, tobacco, sorghum, etc., with variable row spacing. It loosens the top layer of soil to a set depth with a row spacing of 70 cm. For coupling, it is recommended to use a tractor with a power class of at least 80 hp. Cultivator KPN-5.6-05 works where others cannot: Reinforced frame design 160*160*8 mm; Section with a length of 1,356 mm and a weight of 93 kg, which withstands the maximum allowable loads; The parallelogram design of the working organ sections offers increased rigidity, preventing crop damage and ensuring replication of the field’s terrain; Each section is equipped with 5 working tools with adjustable inter-row spacing; Working depth of 5–15 cm; Continuous adjustment of working depth is achieved by the section’s replicating wheel; New model sections with a spring support manufactured by Bianchi and 150 mm arrow-shaped tines process the maximum allowable row spacing; Distance between working tools - 300 mm; The reinforced section enables processing of very compacted soils; Tucking at speeds from 10 km/h; Working tools are made of high-strength boron steel; Hiller attachments can be installed;

221 000 UAH

Seed drill "DEMETRA MINI" СЗД 2700V - фото

Seed drill "DEMETRA MINI" СЗД 2700V SZD-2700V Mini

Mini Seeder SZD-2700V (mounted) A seeder for mini tractors built to European quality standards, designed for sowing cereals and small‐seeded crops with simultaneous application of dry mineral fertilizers. Equipped with: A continuously variable (stepless) transmission mechanism (for ease and precision in setting the seeding rate) A hopper rear wall made of stainless steel Polymer seed and fertilizer dispensing devices (additionally equipped with rollers for seeding forage crops) Openers made of hardened steel (Grade 30MnB5) Spring-loaded furrow closers (with the option to install conventional trailed wheels) When operated on small fields with non-standard dimensions, this seeder significantly reduces seeding time and energy consumption compared to trailed seeders. It can be mounted with tractors with power from 54 hp. Technical specifications of SZD mini SZD Model 2700 Working width (m) 2.7 Number of rows (pcs.)* 18/36 Distance between openers (mm)* 75/150 Seeding depth (cm) 0 – 11 Opener pressure (kg) up to 65 Seeding speed (km/h) 3 – 12 Transport speed (km/h) 20 Productivity (ha/hour) 0.72–3.06 Hopper capacity (m³/kg)** 0.29 (253) - with seed 0.22 (188) - with fertilizers 0.07 (65) Full load covers (ha) 0.75 Empty seeder weight (kg) 746 Full seeder weight (kg)** 1000 Dimensions: W x D x H (m) 3.16 x 1.63 x 1.415 Technology track (m) 3.0 Hitch category I Mini tractor power, not less than (kW/hp) 35/48 * Openers without or with offset / 2-row ** Maximum weight indicated! May vary depending on the density of the seeding material

232 000 UAH

High-speed wide-mesh plow ПШН-6 ПШН-6

243 000 UAH

Seed drill "DEMETRA MINI" СЗД 3000V - фото

Seed drill "DEMETRA MINI" СЗД 3000V SZD-3000V Mini

Mini Seeder SZD-3000V (mounted) A seeder for mini tractors built to European quality standards, designed for sowing cereals and small‐seeded crops with the simultaneous application of dry mineral fertilizers. Equipped with: A continuously variable (stepless) transmission mechanism for ease and accuracy in setting the seeding rate A hopper rear wall made of stainless steel Polymer seed and fertilizer dispensing devices (additionally equipped with rollers for sowing forage crops) Openers made of hardened steel (Grade 30MnB5) Spring-loaded furrow closers (with the option to install conventional trailed wheels) When operated on small fields with non-standard dimensions, this seeder significantly reduces the seeding time and energy consumption that would otherwise be lost with trailed seeders. It can be mounted with tractors with power from 48 hp. Technical specifications of SZD mini SZD Model 2400 Working width (m) 2.4 Number of rows (pcs.)* 16/32 Distance between openers (mm)* 75/150 Seeding depth (cm) 0 – 11 Opener pressure (kg) up to 65 Seeding speed (km/h) 3 – 12 Transport speed (km/h) 20 Productivity (ha/hour) 0.63 – 2.7 Hopper capacity (m³/kg)** 0.265 (225) - with seed 0.2 (167) - with fertilizers 0.065 (58) Full load covers (ha) 0.67 Empty seeder weight (kg) 680 Full seeder weight (kg)** 905 Dimensions: W x D x H (m) 3.76 x 1.63 x 1.415 Technology track (m) 3.6 Hitch category I / II Mini tractor power, not less than (hp) 80 * Openers without or with offset / 2-row ** Maximum weight indicated! May vary depending on the density of the seeding material

248 000 UAH

Row cultivator КПН-5,6 with a feeding device (8 row) - фото

Row cultivator КПН-5,6 with a feeding device (8 row) КПН-5,6

Mounted Cultivator KPN-5.6 is designed for inter-row cultivation of corn, sunflower, castor bean, and other row crops sown with 600, 700, or 900 mm row spacing, providing complete weed cutting, high-quality soil loosening, and simultaneous application of granular mineral fertilizers. T he parallelogram suspension of the working section units ensures that the ground relief is followed, and the low-pressure tires along with the cultivator's rubberized rollers provide self-cleaning from caked dirt. An option is provided for using the cultivator for continuous cultivation with the use of flat-cutting one-sided blades. Advantages of our cultivator: Fertilizing device High-quality polymer hoppers, resistant to ultraviolet radiation and mechanical impacts Metal screw shaft Steel gears are installed in the gearbox Reinforced section with a 16 mm thick bar All section units run on bearings Holders of the working units are made of steel casting Low-pressure (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating of certain parts Technical specifications: Parameter name Parameter value KPN-4.2 KPN-5.6 KPN-8.4 1 General specifications 1.1 Cultivator type mounted 1.2 Tractor power class, hp, not less than 65 80 100 2 Application requirements 2.1 Capacity, ha/h 4.6 6 7.5 2.2 Working width, m 4.2 5.6 8.4 2.3 Cutting blade width, mm 270-330 2.4 Working depth, cm 5-16 2.5 Weed combing depth, cm, not more than 5-16 2.6 Weed cutting and combing, % 100 2.7 Transport speed, km/h, not more than 15 2.8 Working speed, km/h, not more than 10 3 Design indicators 3.1 Total (design) weight, kg, not more than 750 950 1800 3.2 Overall dimensions in working position, mm: - length -width -height 4850 2100 1700 6500 2100 1700 9250 2100 1700 Parameter name Parameter value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport position, mm: -length -width -height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, mm 300

249 000 UAH

Row cultivator КПН-5,6 with liquid mineral fertilizer application system (8 row) - фото

Row cultivator КПН-5,6 with liquid mineral fertilizer application system (8 row) КПН-5,6 (РМД)

Mounted Cultivator KPN-5.6 with a liquid mineral fertilizer application system designed for inter‐row cultivation of corn, sunflower, castor bean, and other row crops sown with row spacings of 600, 700, or 900 mm, featuring complete weed cutting, high‐quality soil loosening, and simultaneous application of liquid mineral fertilizers. The parallelogram suspension of the working organ sections ensures replication of the soil relief, while the atmospheric pressure tires and the rubber rollers of the cultivator provide self‐cleaning from caked dirt. An option for continuous cultivation using single‐sided flat‐cutting tines is provided. Advantages of our cultivator: High-quality polymer hopper, resistant to ultraviolet radiation and mechanical impacts Reinforced section with a 16 mm thick bar All section units are mounted on bearings Steel-cast holders for the working organs Atmospheric (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating on selected parts Technical specifications: Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 1 General Specifications 1.1 Cultivator Type mounted 1.2 Tractor power class, hp, not less than 65 80 100 2 Application Requirements 2.1 Productivity, ha/h 4.6 6 7.5 2.2 Working capture width, m 4.2 5.6 8.4 2.3 Cutting tines capture width, mm 270-330 2.4 Working depth, cm 5-16 2.5 Weed combing depth, cm, not more than 5-16 2.6 Weed cutting and combing, % 100 2.7 Transport speed, km/h, not more than 15 2.8 Working speed, km/h, not more than 10 3 Design Indicators 3.1 Total (design) weight, kg, not more than 750 950 1800 3.2 Overall dimensions in working state, mm: - length - width - height 4850 2100 1700 6500 2100 1700 9250 2100 1700 Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport state, mm: - length - width - height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, mm 300

259 000 UAH

Row cultivator КПН-5,6-02V КПН-5,6-02

Mounted Cultivator KPN-5.6-02 - a new product from the Demetra factory, featuring tanks made of stainless steel and next-generation variators that simplify fertilizer application rate settings. It is intended for inter-row cultivation of corn, sunflower, castor bean, and other row crops with row spacings of 600, 700, or 900 mm, ensuring complete weed cutting, high-quality soil loosening, and simultaneous application of granular mineral fertilizers (tuki). The parallelogram suspension of the working section units provides terrain following. The low-pressure tires and the cultivator’s rubber rollers ensure self-cleaning from caked soil. An option is provided for using the cultivator for continuous cultivation with the use of one-sided flat-cutting blades. Advantages of our cultivator: Stainless steel fertilizing device Variator installed instead of a gearbox Reinforced section with a 16 mm thick bar All section units run on bearings Holders of working tools made of steel casting Low-pressure (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating on certain parts

260 000 UAH

Deep ripper ГРД-7 (3500) grd-7

The purpose of the subsoiler is to destroy the plow pan, preserve moisture, help regulate the air-water balance, and increase fertility. The ГРД subsoiler helps to: create conditions for the accumulation of moisture from the air and its even distribution; increase porosity and improve the capillary system of the soil; activate biological processes that promote active root system development of crops and increase yields by 12-18%; remove excess rain and meltwater; reduce soil resistance when tractors operate with other equipment. This occurs by decreasing soil density, leading to fuel savings, reduced consumption of lubricants, and lower service loads; Technical characteristics of subsoilers No. z/p Name of parameter Values HRD-3 HRD-4 HRD-5 HRD-5 HRD-7 1 Productivity per 1 hour of main operation, ha/h 1.5 2.3 3.0 2.5 3.6 2 Number of working shanks, pcs. 3 4 5 5 7 3 Distance between shanks, cm 60/75 75 75 55 55 4 Tractor drawbar power, min, hp 80 120 150 150 200 5 Maximum working depth, cm 45 6 Working speed, not more than, km/h 7-10 7 Transport speed, km/h up to 15 8 Weight, kg 780 990 1210 1060 1400 9 Working width, m 1.5 (1.8) 2.3 (2.6) 3.0 (3.3) 2.5 (2.8) 3.5 (3.9) 10 Overall dimensions, m - length 1.5 2.3 3.0 2.5 3.6 - width 2.1 2.86 3.57 2.86 3.98 - height 1.34 1.34 1.34 1.34 1.34 11 Road clearance, min, mm 350 12 Warranty period of operation, min, months 12 13 Warranty service life, ha up to 500 14 Service life, min, years 8

261 000 UAH

Roller Shredder ППР-6 (Ш) ППР-6 (Ш)

267 000 UAH

Roller shredder ППР-6 ППР-6

Cutting roller water-fed hydrofied - designed for shredding plant residues after sunflower, corn, and straw, as well as for leveling and partial mulching of the field surface. The easy-to-use design and hydrofied frame allow the shredder to be operated by just one operator. Features of the shredder: Blade material: Boronized Steel (thickness 8 mm) Water-fed drum Robust frame (wall thickness – 8 mm) Steel welded bracket for the drums High-quality hardware, strength class - 8,8 Spherical roller bearing 22309 Specifications: Productivity - 7,2-8 ha Capture width - 6 m Number of knife rows - 8 (5 knives per row, total 120 knives) Working speed - 10-15 km/h Transport speed - 20 km/h Weight - 1800 kg Compatible with tractors from - 80 hp

267 000 UAH

Precision seed drill СПМ-6 СПМ-6

Mounted Cultivator KPN-5.6 with a liquid mineral fertilizer application system designed for inter‐row cultivation of corn, sunflower, castor bean, and other row crops sown with row spacings of 600, 700, or 900 mm, featuring complete weed cutting, high‐quality soil loosening, and simultaneous application of liquid mineral fertilizers. The parallelogram suspension of the working organ sections ensures replication of the soil relief, while the atmospheric pressure tires and the rubber rollers of the cultivator provide self‐cleaning from caked dirt. An option for continuous cultivation using single‐sided flat‐cutting tines is provided. Advantages of our cultivator: High-quality polymer hopper, resistant to ultraviolet radiation and mechanical impacts Reinforced section with a 16 mm thick bar All section units mounted on bearings Steel-cast holders for the working organs Atmospheric (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating on selected parts Technical specifications: Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 1 General Specifications 1.1 Cultivator Type mounted 1.2 Tractor power class, hp, not less than 65 80 100 2 Application Requirements 2.1 Productivity, ha/h 4.6 6 7.5 2.2 Working capture width, m 4.2 5.6 8.4 2.3 Cutting tines capture width, mm 270-330 2.4 Working depth, cm 5-16 2.5 Weed combing depth, cm, not more than 5-16 2.6 Weed cutting and combing, % 100 2.7 Transport speed, km/h, not more than 15 2.8 Working speed, km/h, not more than 10 3 Design Indicators 3.1 Total (design) weight, kg, not more than 750 950 1800 3.2 Overall dimensions in working state, mm: - length - width - height 4850 2100 1700 6500 2100 1700 9250 2100 1700 Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport state, mm: - length - width - height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, mm 300

270 000 UAH

Hydraulic harrow БПГ-12 БПГ-12

Harrow BPG-12 (Hydraulic Towed Harrow) Designed for field harrowing. It is used for soil loosening (moisture retention) by the traditional tillage method and is equipped with 12 heavy toothed harrows. The advantage of this harrow coupling is its working width (12 m in one pass), which significantly impacts labor productivity and resource savings, thereby reducing the cost of soil treatment. Technical specifications of BPG No. Specification Name Value BPG-12 BPG-14 BPG-18 BPG-14 with spring harrows 1 Tractor power, not less than, hp 80 80 120 80 2 Productivity per 1 hour of main operation, ha/h 6-9 8-11 10-14 8-11 3 Working speed during moisture-conserving soil treatment, km/h 10-12 4 Working speed during post-emergence treatment, km/h 2-3 5 Working capture width, m 12 14 18 14 6 Working depth, cm 5-8 2-8 7 Weight, kg 1440 1680 2150 1800 8 Overall dimensions in working position, m - length 7.9 8.7 10.8 8.7 - width 12.3 14.0 18.3 14.6 - height 0.55 0.7 Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport state, m: - length - width - height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, m 300

273 000 UAH

Row cultivator КПН-5,6 with a feeding device (12 row) - фото

Row cultivator КПН-5,6 with a feeding device (12 row) КПН-5,6 (12)

Mounted Cultivator KPN-5.6 12-row with a fertilizing device is designed for inter‐row cultivation of corn, sunflower, castor bean, and other row crops sown with 600, 700, or 900 mm row spacing, with complete weed cutting and high‐quality soil loosening along with the simultaneous application of granular mineral fertilizers (tuki). The parallelogram suspension of the working organ sections ensures that the soil relief is copied, while the atmospheric pressure tires and the rubber rollers of the cultivator provide self‐cleaning from caked dirt. An option for continuous cultivation using single‐sided flat‐cutting tines is provided. Advantages of our cultivator: Fertilizing device High-quality polymer hoppers, resistant to ultraviolet radiation and mechanical impacts Metal screw shaft Steel gears installed in the gearbox Reinforced section with a 16 mm thick bar All section units mounted on bearings Steel-cast holders for the working organs Atmospheric (soft) tire Transport mechanism Powder coating Anti-corrosion galvanic coating on selected parts Technical specifications: Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 1 General Specifications 1.1 Cultivator Type mounted 1.2 Tractor power class, hp, not less than 65 80 100 2 Application Requirements 2.1 Productivity, ha/h 4.6 6 7.5 2.2 Working capture width, m 4.2 5.6 8.4 2.3 Cutting tines capture width, mm 270-330 2.4 Working depth, cm 5-16 2.5 Weed combing depth, cm, not more than 5-16 2.6 Weed cutting and combing, % 100 2.7 Transport speed, km/h, not more than 15 2.8 Working speed, km/h, not more than 10 3 Design Indicators 3.1 Total (design) weight, kg, not more than 750 950 1800 3.2 Overall dimensions in working state, mm: - length - width - height 4850 2100 1700 6500 2100 1700 9250 2100 1700 Parameter Name Parameter Value KPN-4.2 KPN-5.6 KPN-8.4 3.3 Overall dimensions in transport state, mm: - length - width - height 2090 5400 2020 2090 7200 2020 2090 9600 2020 3.4 Ground clearance, mm 300

278 000 UAH

Cultivator for continuous cultivation КПСО-4 - фото

Cultivator for continuous cultivation КПСО-4 КПСО-4

Universal, wide-capture, designed for resource-saving pre-sowing and vapor soil cultivation, cutting and weeding of weeds, as well as leveling and compacting the soil surface prior to seeding. It is used on all types of soil thanks to its versatility provided by numerous adjustments of the cultivator itself and its mounted equipment. Specifications: Working width – 4 m. Frame: tube 80*80, 60*80 S-shaped spring support “Bellota” 20 working units, tine 250 mm, made of BOR steel With rear tines arranged in 2 rows. Tine thickness – 10 mm Rollers, height-adjustable by screw and shock absorber. Absorber spring – 10 mm. FKL bearing. Hydraulic cylinders 75*30*200 Wide wheels 6.50*16 Compatible with tractors from 80 hp Weight 1625 kg № item Specification Name Parameters KPSO-4 KPSO-5 KPSO-6 KPSO-8 KPSO-10 1 Productivity per 1 hour of main operation, ha/h 3.5-4.0 4.5-5.0 5.0-5.5 7.5-8.0 8.5-9.0 2 Tractor power class, minimum, hp 100 120 150 200 240 3 Working speed, maximum, km/h 12 4 Weight ±1%, kg 1625 2050 2800 3900 4200 5 Working capture width, m 4.0 5.0 6.0 8.0 10.0 6 Cutting tines capture width, mm 260 7 Working soil depth, cm 5-12 8 Weeding depth, cm 7 9 Cutting tines, pcs 20 26 31 41 49 10 Harrow teeth 20 26 57 69 81 11 Pressing rollers, pcs 2 2 4 4 6 12 Overall dimensions, m - Length 5.4 5.4 7.7 7.6 7.6 - Width in working/transport position 4.2 5.2 6.2/4.2 8.6/4.9 9.9/4.9 - Height in working/transport position 1.0/1.3 1.0/1.3 1.4/2.6 1.4/3.2 1.4/3.8 13 Maximum transport speed, km 20 14 Ground clearance, mm 300

290 000 UAH

Hydraulic harrow hitch БПГП-12 bpgp-12

KPSO-4 (T) with reinforced tandem support wheels A universal, wide-working cultivator designed for resource-saving pre-sowing and in-season (steam) soil cultivation, weed cutting and raking, as well as leveling and compacting the soil surface for sowing. It is applicable on all types of soil thanks to its versatility, provided by numerous adjustments of the cultivator and its additional equipment. No. z/p Parameter Name Parameters KPSO-4 KPSO-5 KPSO-6 KPSO-8 KPSO-10 1 Cultivator productivity per hour of main operation, ha/h 3.5–4.0 4.5–5.0 5.0–5.5 7.5–8.0 8.5–9.0 2 Minimum tractor drawbar power, hp 100 120 150 200 240 3 Working speed, not more than, km/h 12 4 Weight, kg 1625 2050 2800 3900 4200 5 Working width, m 4.2 5.0 6.0 8.0 10.0 6 Cutting sweep width, mm 260 7 Tillage depth, up to, cm 5–12 8 Tillage depth for weed removal, cm 7 9 Number of cutting sweeps, pcs 20 26 31 41 49 10 Number of packer drums, pcs 2 2 4 4 6 11 Overall dimensions, m – Length 5.4 7.7 7.6 7.6 – Working/transport width 4.2 5.2 6.2/4.2 8.6/4.9 9.9/4.9 – Working/transport height 1.0/1.3 1.0/1.3 1.4/2.6 1.4/3.2 1.4/3.8 13 Maximum transport speed, km 20 14 Road clearance, mm 300

291 000 UAH

Ring spur roller ККШ-6 ККШ-6

301 000 UAH

Precision seed drill СПМ-8 СПМ-8

303 000 UAH

Precision seed drill СПМ-8 (М) СПМ-8 (М)

Harrow BPG-12 (Hydraulic Towed Harrow) Designed for field harrowing. It is used for soil loosening (moisture retention) by the traditional tillage method and is equipped with 12 heavy toothed harrows. The advantage of this harrow coupling is its working width (12 m in one pass), which significantly improves labor productivity and resource savings, thereby reducing the cost of soil treatment. Technical specifications of BPG No. item Specification Name Unit Corresponding Parameters SPM‑4.0 SPM‑6.0 SPM‑8.0 SPM‑12.0 1 Tractor power (minimum) with which it is coupled hp 25 65 80 80 2 Productivity per 1 hour of main operation ha/h 6-9 8-11 10-14 8-11 3 Working speed during moisture-conserving soil treatment km/h 2.5-9 4 Working capture width m 2.8 4.2 5.6 5.6 7 Row spacing mm 450-700 8 Seed and fertilizer placement depth (min-max) mm 40..120 13 Seeder weight t 0.75 1.0 1.25 1.5 14 Overall dimensions of the seeder (without markers) in working position m 3.35 4.75 6.15 6.15 length width 2.3 height 3.0 16 Transport speed, not more than km/h 15 17 Road clearance, not less than mm 300

303 000 UAH

Row cultivator КПН-5,6-05 with liquid mineral fertilizer application system (8 row) - фото

Row cultivator КПН-5,6-05 with liquid mineral fertilizer application system (8 row) КПН-5,6-05 КАС

Mounted cultivator KPN-5,6-05 with a liquid mineral fertilizer application system is designed for inter-row cultivation of corn, sunflower, castor, and other row crops sown with row spacings of 600, 700, or 900 mm, featuring complete weed cutting and high-quality soil loosening with simultaneous application of liquid mineral fertilizers. The parallelogram suspension of the working tool sections ensures replication of the soil surface, while atmospheric tires and rubberized rollers of the cultivator provide self-cleaning from adhered dirt. An option is provided for using the cultivator for continuous cultivation with single-sided flat-cutting sweeps. Advantages of our cultivator: High-quality polymer hopper resistant to ultraviolet radiation and mechanical impacts Reinforced section with a 16 mm thick bar All section components mounted on bearings Steel-cast holders for working tools Atmospheric (soft) tire Transport device Powder coating Anti-corrosive galvanic coating on certain parts

303 000 UAH

Latest reviews

Seed drill "DEMETRA MINI" СЗД 2700V

Замовив сівалку, а на 3 день вже привезли. Дуже чудовий сервіс та менеджера, зробили знижку на доставці. Сівалка зарекомендувала себе позитивно в сівбі озимих зернових. Спробував навіть посіяти по стерні сої, через дощі не можна було обробити грунт. Сходи вийшли хороші, сівалка із своєю задачою справилась. Агрегатується із трактором МТЗ 82. Добре підійде для невеликих фермерів одноосібників, які займаються городами, сіяти і переїжджати одне задоволення. Рекомендую, хоче весняна сівба попереду. P.S. Вразила прискіпливість до деталей на сівалці, а саме заокруглені зайки із шляпками на кришці бункера щоб не поранитись.

Seed drill "DEMETRA MINI" СЗД 1800V

Прекрасна сівалка

Disc harrow trailed БДД-2400П

Маю в господарстві дискову борону БДД 2400, експлуатую з трактором Farmer 10286. Роботою даних дисків повністю задоволений. Якість на вищому рівні.

Eccentric plow 3 body Demetra

Купили цей плуг, на заміну плн, думали, що краще (родившись купу оглядів від "псевдо блогерів". На ділі має лише одну перевагу, це вага, все інше без змін. Розчарувалися. Доставка швидка, робота менеджера теж хороша.